Whole House Filter
SSE-025
SSE-055PH
SSE-055PH

Whole House Filter

REQUIREMENT
Maximum operating pressure 0.8MPa(116psi)
Ambient water temperature 2-40°C(36- 104°F)
lron<0.3ppm(0.3mg/L)
Hardness< 7gpg(120mg/L)
Turbidity< 1NTU
UV transmittance> 75%
UV dose≥30mJ/cm2

Send Inquiry

Product Introduction

The whole house filter is made by 304 stainless steel,which was widely used in food industry,medical,considered to be stable and durable.

High quality UV ballast meets international certification suchas CE, UL standard

Reliable High-performance UV lamp,rigorously tested to provide consistent output over the entire lamp life

Controller will go into alarm if the lamp fails

UV chamber with great welding process which enables to pass 1.04MPa 100,000 times water hammer test

Perfect for a wide range of single-faucet,point-of-use or low flow point-of-entry water treatment solutions in homes,cottages,or OEM applications.

Easy to install, no plumber required. Due to the compact design and simple components, there will be less installation time and water will flow through the system without the need for a reservoir or reaction time.

This whole house filter requires only the UV lamp and quartz sleeve to be replaced each year, resulting in lower maintenance costs. Efficient sterilization, sterilizing 99.99% of bacteria and viruses, producing pure water for your entire family.

SPECIFICATION

Model	Flow rate (GPM)	Reactor dimension	In/outlet port	Package size (cm)	Lamp power
SSE-012	1	315*50.8mm	1/4” female	57×40×52/15sets	12w
SSE-016	2	375 X 63.5mm	3/8"female	57×40×52/15sets	16w
SSE-025	6	595 X 63.5mm	1/2"	79.5×28×41.5/8sets	25w
SSE-030	8	915 X 63.5mm	3/4"	119×28×41.5/8sets	30w