Medium Pressure UV System
1
2
3
4

Medium Pressure UV System

The SMP range has 11 models in the range and options to allow flexible installation, it is ideal for water disinfection.

REQUIREMENT
* Maximum operating pressure: 8bar (116 psi)
* Ambient water temperature: 2 - 40 ℃ (36 - 104 ℉)
* Iron < 0.3ppm (0.3 mg / L)
* Hardness < 7gpg (120 mg / L)
* Turbidity < 1 NTU
* UV transmittance > 75%

Send Inquiry

Product Introduction

Medium Pressure UV System Features

UV lamps scientifically optimized for Beer & Beverage – Effectively remove chlorine and chlorine dioxide

High-grade electropolished stainless steel SS316 and Super duplex materials for corrosive environments – Up to 30% energy savings with internal reflection

PLC controller: Provides the user with information on the performance of the UV system and controls power to the lamps.

Double security against overheating:

UV Intensity sensor:

This instrument measures the intensity (W/cm2) of UV light passing through the water and arriving at the sensor.

Temperature sensor:

A hardwired trip switches the system off at high temperatures, whilst a built-in thermocouple provides a temperature measurement on the control panel.

Auto-wiper: An auto-wiper can be used to clean the quartz without having to interrupt the treatment process. Wipers are used in water pre-treatment and wastewater systems where solids or scale deposits can form. Wipers are not required post-RO or demineralization.

Medium Pressure UV System Advantage

1. No chemical and environmental friendly

2 Does not change color, PH and taste

3. Can deal bacteria Mold, Spores and Viruses,antioxidant organisms such as Cryptosporidium and Giardia

4. Compared with ozone disinfection and pasteurization, more cost-effective

5. Proven solution capable of handling Brix up to 69 and UVT shot selection as low as 10%

6. It can remove ozone and dechlorinate.

7. Small size, small footprint, easy to rebuild and install

8. Simple maintenance

2(1)