Whole House Uv Water Filter System
1
2
3
4
5

Whole House Uv Water Filter System

The SAG range has 3 models in the range and options to allow flexible installation, it is ideal for water tap, water disinfection system, etc.

REQUIREMENT
* Maximum operating pressure: 8bar (116 psi)
* Ambient water temperature: 2 - 40 ℃ (36 - 104 ℉)
* Iron < 0.3ppm (0.3 mg / L)
* Hardness < 7gpg (120 mg / L)
* Turbidity < 1 NTU
* UV transmittance > 75%

Send Inquiry

Product Introduction

whole house uv water filter system Disinfection for water from wells, cisterns, tanks or non-chlorinated water.

The whole house uv water filter system disinfection stage is always an essential step when it comes to making water drinkable from any source.

This model is the most powerful of those used for domestic use, and provides effective disinfection in those locations that require a high flow of water. This high flow occurs in homes with several bathrooms, or with a large number of people who can demand water simultaneously. This frequent case occurs, for example, when we have appliances running (washing machine, dishwasher) and at the same time one or more water points are used, in sinks or toilets.

With lamp status indicator

The feeder of this equipment has a LED indicator of the operating status. The LED lights up green when everything is correct, turning red if the lamp stops working.

The most suitable pre-filter.

The water sterilizer must always be preceded by a filtering stage. In this model, the filtering stage requires adequate dimensions for the flow rate, recommending the use of 20” filters that have a polypropylene filter of at least 20 microns, the ideal being a 5 or 1 micron filter. At the bottom of this page you can see the recommended filters and accessories.

For a correct use of this system, go to the page dedicated to UV disinfection . In it we describe its operation and tips for use.