Industrial Uv Water Treatment
video

Industrial Uv Water Treatment

REQUIREMENT
* Maximum operating pressure: 8bar (116 psi)
* Ambient water temperature: 2 - 40 ℃ (36 - 104 ℉)
* Iron < 0.3ppm (0.3 mg / L)
* Hardness < 7gpg (120 mg / L)
* Turbidity < 1 NTU
* UV transmittance > 75%
Send Inquiry
Product Introduction

Each standardized UV disinfection module consists of a special uv lamp for water treatment, UV lamp tube, quartz sleeve, power distribution system and data acquisition system. Technical advantages of industrial UV water treatment module:

◆The low water resistance module structure has lower water resistance than the traditional module structure, and the water level change before and after disinfection is small.

◆The waterproof grade complies with the IP68 grade standard and is suitable for occasions with strict requirements.

◆The cable part is equipped with a sealing ring to effectively prevent the short-circuit damage of the lamp tube caused by water in the cable. Made of high-quality corrosion-resistant stainless steel materials.

Agua Topone SA series constructed with highly polished 316L stainless steel chamber and stainless steel control cabinet.

Furthermore, the UV disinfection does not alter the physicochemical composition of the water. Which means that water going through the UV reactor goes out with the same physical and chemical composition than it has before going in. The process only disinfects by removing viruses, bacteria, microbes, etc.

While all other water disinfection technologies like chlorine, bleach, ozone, chlorine dioxide and other will alter the water. They may even create harmful by-products and residuals that threaten the health.


ADVANTAGES OF THIS ULTRAVIOLET WATER STERILIZER SYSTEM:


An industrial UV water treatment uses ultraviolet germicidal irradiation (UVGI) as a sterilization method to break down microorganisms including pathogens, viruses and molds. The ultraviolet rays work to destroy microorganisms' DNA, thus disrupting their ability to reproduce and effectively killing them. Of the three types of UV — UV-A, UV-B and UV-C — UV-C light is the one used in UV sterilizers. UV-C contains germicidal UV within its spectrum, measured at a wavelength of 254 nanometers (nm). UV-C is shortwave ultraviolet radiation, compared to longwave UV-A and UV-B, and is the type of UV capable of causing the breakdown of the molecular bonds in microorganisms' DNA.

1(001)2(001)


SPECIFICATION


Model

Flow rate

(GPM)

Chamber size

In/outlet

UV lamp

UV lamp quantity

Quartz tube

Ballast

SA-8120

95

1470x 274mm

DN200

GPO1148T5L/4P

8 pieces

QT6-1183

ZUM3-800-120


WORKING PRINCIPLE


4


TYPICAL INSTALLATION RECOMMEND


5


PRODUCT APPLICATION

6789

Secondary water supply disinfection

Circulation cooling

Spring or swimming

Industrial water disinfection


APPLICATION


Industrial UV water treatment have a variety of applications in various industries. Some of their uses include air sterilization, water sterilization, and the sterilization of aquariums and ponds.

Hot Tags: industrial uv water treatment, China, manufacturers, factory, customized, wholesale, price, cheap, OEM, ODM, in stock, made in China, UV Water Sanitizer, UV sanitation light, UV water treatment uk, UV tube light for sterilization, ultraviolet sterilization lamp, ultraviolet water disinfection system

Send Inquiry

whatsapp

Phone

E-mail

Inquiry