254nm UVC Drinking Water Disinfection
1
2
3

254nm UVC Drinking Water Disinfection

The SAG range has 3 models in the range and options to allow flexible installation, it is ideal for water tap, water disinfection system, etc.

REQUIREMENT
* Maximum operating pressure: 8bar (116 psi)
* Ambient water temperature: 2 - 40 ℃ (36 - 104 ℉)
* Iron < 0.3ppm (0.3 mg / L)
* Hardness < 7gpg (120 mg / L)
* Turbidity < 1 NTU
* UV transmittance > 75%

Send Inquiry

Product Introduction

There are many benefits of using 254nm UVC drinking water disinfection, here are just a few:

No need to handle potentially dangerous chemicals (chlorine)

Virtually immediate disinfection (no contact tanks like chlorine)

Low power consumption environmentally friendly (no disinfection by-products)

No moving parts to wear out or replace UV does not change the taste or odor of the water

Lower equipment investment versus other disinfection options Simple maintenance (with proper pre-treatment).

Chemical vs. Physical 254nm UVC drinking water disinfection of Contaminated Water

Disinfection is defined as “The act of disinfecting, using specialized cleansing techniques that destroy or prevent the growth of organisms capable of infection.”

Disinfection is considered a 4-log reduction or equivalent to a 99.99% reduction

There are generally two methods specifically for the disinfection of water:

CHEMICAL Disinfection: chlorine, ozone, iodine, bromine

PHYSICAL Disinfection: UV light, boiling, fine filtration