Kent Ro Uv Lamp
5
1
2
3
4

Kent Ro Uv Lamp

The SAG range has 3 models in the range and options to allow flexible installation, it is ideal for water tap, water disinfection system, etc.

REQUIREMENT
* Maximum operating pressure: 8bar (116 psi)
* Ambient water temperature: 2 - 40 ℃ (36 - 104 ℉)
* Iron < 0.3ppm (0.3 mg / L)
* Hardness < 7gpg (120 mg / L)
* Turbidity < 1 NTU
* UV transmittance > 75%

Send Inquiry

Product Introduction

Before buying a UV light system check that it:

will be able to treat all of the water needed in the household.

is equipped with a pre-filter to remove any iron, manganese and other dirt and debri that can either absorb or scatter UV light kent ro uv lamp.

has a built in light sensor that can monitor the UV intensity, connected to an alarm system to alert the user in case of low UV level.

has a safety control system that can shut off the water supply in case of a low UV level.

is connected to a constant power supply.

carries the WaterMark symbol and at least one of the following standards ANSI/NSF Standard 55, AS/NZS 3497 or AS/NZS 4348 and treatment classification level.

Also:

Locate the UV light disinfection system kent ro uv lamp as close to the point of use as possible,

Ensure that there are no breaks or backflows in your plumbing system, and

Follow the manufacturers recommended maintenance guidelines.