Wonder Uv Purification
2
1

Wonder Uv Purification

Name: China Customized Wonder Uv Purification Manufacturers, Factory - Wholesale Price - ZUANBANG
Brand: Agua Topone
SKU: 175106077

The SDE range has 8 models in the range and options to allow flexible installation, it is ideal for water tap, water disinfection system, etc.

REQUIREMENT
* Maximum operating pressure: 8bar (116 psi)
* Ambient water temperature: 2 - 40 ℃ (36 - 104 ℉)
* Iron < 0.3ppm (0.3 mg / L)
* Hardness < 7gpg (120 mg / L)
* Turbidity < 1 NTU
* UV transmittance > 75%

Send Inquiry

Product Introduction

Specifications

When it came to producing clean, high-quality water quickly, the AGUA TOPONE wonder uv purification certainly had some impressive specifications and capabilities. First and foremost, this purifier is one-hundred percent chemical free. Due to its UV sanitation method, there was no need for added chemicals similar to what you might find in a pool or irrigation filter. This also ties into the second bonus contained within.

Considering that it purifies water with no chemicals, it will not affect the taste, PH or chemical makeup of the water. The water that goes in will effectively be the same water that comes out, just minus the bacteria or germs. It’s also incredibly fast, able to purify at a rate of 12 gallons per minute. If you’ve ever seen a gallon jug of water at the grocery store, you have a pretty good idea of how much water this really is.

The UV light itself is built to last, and made for up to 9000 hours of use. It’s also powerful enough to kill bacteria and germs in about 1 to 2 seconds. It’s made of glass, so you’ll have to be careful when installing it, but once placed in the protective tubing will be safe from damage. Lastly, AGUA TOPONE offers replacements for any broken parts.

Maintenance

The AGUA TOPONE purifier requires some maintenance at fairly regular intervals. You’ll need to clean the quartz sleeve every 6-12 months and replace it every 24 months. The UV lamp should also be replaced once a year in order to ensure best performance. This wasn’t all that tedious, but pre-treating water so that the purifier worked properly can become a little bit of a hassle. You’ll need to make sure that your existing water meets the following requirements:

Iron < 0.3 ppm
Hardness < 7 gpg
Turbidity <1 NTU
Manganese < 0.05 ppm
Tannins < 0.1 ppm
UV Transmittance > 75%

While we understood the need for our water to already have certain conditions, it did detract slightly from the overall capabilities of the purifier, mainly because it required an extra thing to monitor while it was installed. It would be really incredible if the AGUA TOPONE purifier could not only rid water of bacteria, but also pre-treat it to meet the above mentioned standards. The need to pre-treat water is certainly worth mentioning, but didn’t change our overall opinion that the AGUA TOPONE wonder uv purification purifier was a quality device that was easy to install.