12GPM Whole House UVC LED Water Sterilizer

AGLED-12G is a compact, high-flow UVC LED water treatment system developed for point-of-entry water disinfection.

With a maximum flow capacity of 12 GPM / 45 LPM, it is suitable for whole-house water treatment, private well water systems, light-commercial applications and OEM water purification equipment.

Unlike chemical disinfection methods, UVC treatment does not require disinfectant dosing and does not add treatment chemicals to the water.

The compact 24 V DC architecture also makes AGLED-12G easy to integrate into complete residential and commercial water treatment systems.

CHARACTERS

• High-Flow UVC LED Disinfection

AGLED-12G provides a maximum flow rate of up to 12 GPM (45 LPM), allowing one compact UVC LED unit to serve whole-house and light-commercial applications.It is designed to provide a final microbial disinfection barrier after appropriate upstream water treatment.

• Flow-Activated Operation

The system has a startup flow of:

> 4 L/min

The UVC LED module can operate according to actual water demand, making the system particularly suitable for intermittent residential water use.Compared with systems that require continuous lamp operation, flow-activated UVC LED technology helps reduce unnecessary operating time.

• 270–280 nm UVC LED Technology

AGLED-12G uses UVC LEDs operating within the 270–280 nm wavelength range.

As water passes through the reactor, UVC energy acts on susceptible microorganisms and interferes with their ability to reproduce.

This provides a physical microbial disinfection process without chemical disinfectant dosing.

• Low-Voltage 24 V DC Operation

AGLED-12G operates with:

Input voltage: 24 V DC

Rated power: 16 W

The low-voltage architecture makes the system convenient for integration into residential water treatment equipment and OEM purification systems.

• Compact Point-of-Entry Design

Despite providing a maximum flow rate of 12 GPM, AGLED-12G maintains a compact product size of approximately:

Ø63.5 × 315 mm

The slim cylindrical structure helps reduce installation-space requirements in whole-house water treatment systems.

• Flexible 1-Inch Connection

The reactor uses:

G1 Female Inlet / Outlet

It can be used with suitable 1-inch NPT1 / PT1 / G1 / R1 male-thread fittings, allowing easier integration into different plumbing systems and international projects.

• Designed for Frequent Switching

AGLED-12G is designed for more than:

100,000 switching cycles

This makes the UVC LED system well suited to flow-activated applications where the module may switch on and off frequently according to water demand.

• Model-Specific Disinfection Performance

Under the specified SGS report test conditions, AGLED-12G achieved:

99.999% E. coli reduction at 12 GPM

Actual field performance may vary depending on water quality, flow rate, UV transmittance, turbidity and overall system configuration.

SPECIFICATIONS

INSTALLATION RECOMMENDATION

Recommended Treatment Sequence

Pre-Filter → Sediment / Carbon / Other Required Pretreatment → AGLED-12G UVC LED Water Sterilizer

Clean Water Distribution

AGLED-12G is normally recommended as the final treatment stage before the treated water enters the building distribution system.

Before installation, the actual water conditions and system requirements should be confirmed.

Important factors include water flow, pressure, temperature, UV transmittance, turbidity, iron content and upstream filtration.

Hot Tags: 12gpm whole house uvc led water sterilizer, China, manufacturers, factory, customized, wholesale, price, cheap, OEM, ODM, in stock, made in China