Municipal water supply UV sterilizer is a professional equipment used for disinfection and sterilization of tap water supply systems in cities, towns, villages and troops.
After bacteria, viruses, etc. are irradiated with a certain dose of ultraviolet C light (wavelength 253.7nm), the DNA structure of bacteria and viruses will be destroyed, making them dead or unable to reproduce offspring.
To achieve the purpose of killing bacteria, viruses and other microorganisms in the municipal water supply system. With the improvement of people's requirements for tap water quality and the implementation of related policies, municipal water supply. The external line sterilizer is an effective disinfection device for the tap water system in contemporary society.
Agua Topone uv water sterilizer features
1.Stable and reliable: municipal water supply UV sterilizer has a high sterilization rate and a large processing capacity. At the same time,the disinfection process does not produce secondary pollutants.It is suitable for tap water systems in rural areas to large cities.
2.Complete qualifications: The products have undergone strict inspection, have water wading approval documents, test reports, and have passed the inspections and passed the factory.
3.Good sterilization effect: It can effectively kill all kinds of bacteria, viruses,algae and other microorganisms in the pipeline water,so that it can meet the relevant standards of domestic water.
4.Easy maintenance:small footprint and easy installation.
Agua Topone uv water sterilizer instructions for use
The municipal water supply UV sterilizer is installed horizontally indoors, and the bracket is fixed on the designated foundation or workbench.and also pay attention to leave the installation position to extract the UV lamp and space, the electric control box is installed near the device, the relative humidity of the environment is not more than 80°C, no corrosive gas, no conductive dust, no strong vibration and shock.
Ultraviolet for municipal water supply is a pipeline type UV sterilizer,two water inlets can be selected as the water inlet according to the direction of the pipeline,one is used as the water outlet,and the horizontal and vertical types can be placed according to the user's needs,in order to facilitate the replacement of lamps and quartz tubes,and leave a space of the same length as the device on one side.
After the product is installed,first pass the water test, and then turn on the power supply if there is no water leakage.
After the power is turned on, the indicator light will be on,make sure the lamp head and the lamp tube are connected properly,and the dust cover is covered.Then click the "power switch" button.At this time,the equipment is running normally.After confirming that the lamp is on for 3-5 minutes,first open the water valve and then open the water inlet valve,then the machine starts to run.
