Feb 14, 2022 Leave a message

Reviewing UV Water Disinfection Technologies: How UV LEDs Affect The POE Market

Water contamination events such as what occurred in Flint, MI naturally elevate concerns about the health effects of contaminated drinking water. It is fair to say that the current pandemic has also brought a whole new meaning to transmissible disease anxiety. It is therefore timely to review some aspects of potable water disinfection, specifically the application of ultraviolet technologies to the disinfection of water.


A brief history of UV disinfection
It is perhaps surprising that UV light has been recognized as an effective water treatment technology for more than 200 years and that ultraviolet germicidal irradiation (UVGI) was first used as a disinfection technique more than 100 years ago. Since then, UV has become firmly established in water treatment plants globally and in recent decades has become increasingly popular for residential (whole-house, POE) applications, where the use of chemical disinfection is both impractical and undesirable. Removing the need to transport, store and handle hazardous chemicals together with the elimination of DBPs has helped to drive the adoption of UV as a primary disinfection method although the lack of a disinfection residual still needs to be considered where a pipework distribution system is involved. The introduction of high-output, low-pressure mercury lamps with a specific spectral output of 253.7 nanometers (nm) wavelength allowed for smaller scale (e.g., residential) applications to become a highly practical proposition.

It could be said that the particular wavelength emitted from low pressure (UV) mercury lamps is a happy accident, given that it is very close to the peak germicidal wavelength for the inactivation of pathogens in the range of 262 – 265 nm. More recently, a very significant technology advance has been the development and introduction of UV-C LEDs, which offer several advantages including the absence of mercury and instant-on (no warm up period required) technology, allowing for intermittent rather than 24/7 power application. In 2012, UV-C LEDs made their first appearance into the commercial water disinfection system market. The initial systems were smaller than conventional mercury vapor systems; however, they typically had lower flowrates and cost several thousands of dollars. Since then, UV-C LEDs have primarily grown in POU applications with systems becoming more compact, making them easily integrated or retro-fitted into existing products. As the design of UV-C LED systems improved, they have finally become competitive in the POE UV disinfection market. The improvements of these systems were most noticeable in their robustness, reactor efficiency and cost of ownership when compared to conventional mercury systems.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry