12 GPM UVC LED UV Water Disinfection Module Successfully Passes SGS Testing
In the field of drinking water safety, UVC LED water disinfection technology has rapidly gained global market share due to its high sterilization efficiency, mercury-free design, and chemical-free operation, becoming a major trend in whole-house water treatment systems. Recently, many clients and partners have asked: Has the Agua Topone 12 GPM UVC LED UV water disinfection module been certified by an authoritative third-party testing organization?
The answer is yes. We hereby confirm that the Agua Topone 12 GPM UVC LED module has not only passed testing but also undergone comprehensive and rigorous high-standard evaluation at SGS laboratories in China, a world-leading independent testing organization. The results demonstrated that the product delivers outstanding performance in drinking water applications, with a bacterial inactivation rate exceeding >99.999%, fully verifying its reliability and safety in high-flow whole-house disinfection scenarios.
This achievement once again highlights Agua Topone's technological leadership and commitment to quality in the field of UVC LED UV water disinfection. Moving forward, we will continue to drive green, safe, and eco-friendly water disinfection solutions, bringing healthier and cleaner drinking water to households worldwide.
The Importance of Third-Party Verification
We firmly believe that true product reliability must be proven by objective, professional third-party testing-never by self-claims alone. That is why Agua Topone consistently submits its core products to authoritative organizations for strict evaluation throughout research, development, and quality control.
This particular test was conducted in full compliance with the People's Republic of China National Standards (GB/T), covering test design, challenge conditions, process monitoring, and result validation-ensuring scientific, comprehensive, and authoritative testing. Specifically, the evaluation followed GB/T 5750.12-2023 (Standard Examination Methods for Drinking Water – Part 12: Microbiological Parameters), ensuring both reliability and credibility.
Notably, we not only subject our products to the most rigorous challenges but also openly publish all testing details. This reflects both our absolute confidence in our technology and our openness to scrutiny from markets and professional standards alike.
1. Purpose and Standards
Purpose: To verify the device's immediate microbial removal capacity during the startup stage.
Primary References:
· Standards for Drinking Water Hygiene (GB 5749)
· Hygienic Safety and Functional Evaluation Specifications for Drinking Water Treatment Devices – General Devices
Testing Standard:
· GB/T 5750.12-2023 Standard Examination Methods for Drinking Water – Part 12: Microbiological Parameters
2. Materials and Methods
· Test Strain: Escherichia coli ATCC 25922 (standard quality-control strain).
· Method: Challenge Test.
· Procedure: A high-concentration bacterial suspension (1.0 × 10⁶ CFU/100 mL) was injected into the device's inlet, and colony counts were measured at the outlet.
· Flow Rate: 12.0 Gallons per minute (45.4 L/min).
· Calculation: Removal Rate (%) = [(Inlet concentration – Outlet concentration) / Inlet concentration] × 100%.
3. Results
· Inlet Concentration: (1.0 ± 0.1) × 10⁶ CFU/100 mL
· Outlet Concentration: < 1 CFU/100 mL (below detection limit)
· Removal Rate: > 99.999%
4. Conclusion and Discussion
The results confirm that under standard test conditions, the Agua Topone 12 GPM UVC LED UV water disinfection module achieved a total coliform removal rate exceeding 99.999%. This proves that the system can provide reliable water safety protection even during its initial operating phase. The standardized test process provides an objective and authoritative technical reference for evaluating UV LED disinfection equipment performance.
The World's First Whole-House UV LED Disinfection System
Agua Topone proudly introduces the world's first whole-house UV LED water disinfection system, featuring replaceable modules to ensure long-term, efficient performance.
·Mercury-free and environmentally safe;
·No chemical additives and no residues;
·>99.999% bacterial inactivation rate, ensuring safe, clean, and healthy drinking water.
If you are looking for an eco-friendly, SGS-certified, whole-house UVC LED water disinfection solution, we welcome you to contact us for more information and technical support.
